CentOS 7 Install

The steps to install each configuration is below. Note, there are one line versions of the install in each section below. The average install time is between 4-9 minutes depending on the resources on your vm/server.

Note: You can add a “-b <version number>” to the end of the git command to install and specific version of dSIPRouter.

Install (Don’t Proxy audio (RTP) traffic)

yum update -y
yum install -y git
cd /opt
git clone https://github.com/dOpensource/dsiprouter.git
cd dsiprouter
./dsiprouter.sh install -kam -dsip

One Line Version:

yum update -y && yum install -y git && cd /opt && git clone https://github.com/dOpensource/dsiprouter.git && cd dsiprouter && ./dsiprouter.sh install -kam -dsip

Once the install is complete, dSIPRouter will automatically start MySQL, Kamailio and the UI.

Install (Proxy audio (RTP) traffic)

If you need to proxy RTP traffic then use -all install option. The command to install dSIPRouter and the RTPEngine would be:

yum update -y
yum install -y git
cd /opt
git clone https://github.com/dOpensource/dsiprouter.git
cd dsiprouter
./dsiprouter.sh install -all

One Line Version:

yum update -y && yum install -y git && cd /opt && git clone https://github.com/dOpensource/dsiprouter.git && cd dsiprouter && ./dsiprouter.sh install -all

Install (Proxy audio (RTP) traffic with PBX and dSIPRouter behind NAT)

If you have a requirement where the PBX’s and dSIPRouter are behind NAT then use the steps below, which are the same as above, but you will add a -servernat parameter.

yum update -y
yum install -y git
cd /opt
git clone https://github.com/dOpensource/dsiprouter.git
cd dsiprouter
./dsiprouter.sh install -all -servernat

One Line Version:

yum update -y && yum install -y git && cd /opt && git clone https://github.com/dOpensource/dsiprouter.git && cd dsiprouter && ./dsiprouter.sh install -all