PBX(s) and Endpoints

Allows you to define a PBX or Endpoint that will send or receive calls from dSIPRouter. The PBX or Endpoint can use IP authentication or a username/password can be defined.

To add an Endpoint Group:

  1. Click on Endpoints Groups.

  2. Click on the green Add button.

_images/dSIP_PBX_Add.png

  1. Configure the Endpoint Group

    The Endpoint Tab is where you specify the endpoints that will be signaling with dSIPRouter. The weight field allows you to define how much SIP traffic is distributed to a particular endpoint. If you don’t specify a weight for an endpoint the system will automatically generate a weight. If you are using FusionPBX Domain Auth then Register and INVITE requests will be distributed to the endpoints based upon the weights. You will also have the option to route Inbound calls to the endpoints based on the weights by selecting the name of the Endpoint Group with an LB concatenated to the name. For example, if the name of the Endpoint Group is PBXCluster then you would select PBXCluster LB from the Inbound Mapping Endpoint Group drop down.

  1. Click the green Add button.

_images/dSIP_PBX_ADD_New_PBX.png

  1. Click on the Reload Kamailio button in order for the changes to be updated.